GALAKTIKA LTD

About company

Our company has been a highly qualified supplier of high quality cenospheres since 2014, and our team began to study this material over 30 years ago. Today we have direct access to a significant number of sources.

About company

We offer our customers a wide range of cenospheres with different gradations for all kinds of applications. Color ranges from: dark gray, gray, light gray, steel, off-white, white. The content of aluminum oxide is from 20% to 40%.

About company

Typical content for our sources: 20-24%, 24-30%, 30-35%, 35-40%. Humidity: no more than 0.3% Fractional composition: standard 40-500 microns, also available fractions to choose from. Sinking sediment: no more than 5%, the actual figure is usually 1-3%. Bulk density: from 320 to 420 kg/m3, depending on the source of origin and the customer's wishes.

About company

True Density: 0.64 to 0.85 depending on the source of origin. Some of our sources have excellent hydrostatic compressive strength, which is important for grouting mixtures. Our production has a laboratory where we fully control the quality of raw materials and finished products. We know everything about our cenospheres. The supply of cenospheres is the only business of our company, and we give it all our attention, resources and experience.

About company

We have a significant collection of cenosphere samples from many power plants around the world. We constantly conduct research on cenospheres from various sources in order to satisfy the requirements of the most discerning clients. We have developed and implemented unique technological regulations for deep processing and cleaning and raw materials to obtain high-quality cenospheres used in critical applications. Our production capacity allows us to produce up to 10,000 tons of cenospheres per year.

About company

For drying raw materials, we have two vortex-type drying plants, each of which allows you to evaporate up to 1000 kg of water per hour. This type of installation allows you to very carefully dry the cenospheres without damaging them. We have our own storage facilities that allow storing cenospheres and raw materials for their production to ensure almost year-round operation and supplies.

About company

Also, we are developing a range of products and solutions using cenospheres, which will allow our customers to earn more and provide a wider range of high-tech solutions. The main ports for shipments by 40 HС containers are St. Petersburg and Novorossiysk. Our logistics capabilities and partners provide everything you need to deliver our goods anywhere in the world. Our clients include chemical companies from the USA, Europe, the Arabian and Asian regions.

Why is it profitable
WORK WITH US?

Large assortment
of cenospheres

Color from
gray to white

Аluminum oxide
content 20-40%

Fractional composition
40-500 microns

Humidity no
more than 0.3%

True Density
0.64 to 0.85

Sinking sediment
no more than 5%

ABOUT PRODUCT

Hollow aluminosilicate microspheres or cenospheres are today the most sought after fly ash component for many different applications. Cenospheres are released by flotation during the hydro removal of ash from coal-fired power plants, float to the surface of the water in lagoons, from where they are collected for further processing. However, the content of cenospheres in fly ash is usually very low.

According to our research, the average content of cenospheres is 0.02-0.2%. Due to such a small content, it is difficult to agree with the prevailing opinion about cenospheres as the most important component of ash from the point of view of market potential. Nevertheless, the demand for cenospheres in various industries is growing every year. And if the demand for cenospheres in the oil and gas industry tends to decrease, then the demand for cenospheres for other applications is only growing, however, so are the requirements for properties.

The main suppliers to the world market in the last 10 years have been China and India. In China, a huge number of coal-fired CHP plants have been built, while old ones are being closed in large numbers, new, more powerful ones are being built, but in smaller numbers, which do not have a wet ash removal system. India has about 150 large and medium-sized CHP plants, but since the country does not need heating, a number of stations regularly shut down due to an excess of electricity, and the lack of water does not allow the extraction of cenospheres in many lagoons.

The third supplier of cenospheres to the world market are Russia and Kazakhstan with a total annual volume of cenospheres of about 55 thousand tons. There are also suppliers from Australia, South Africa and Turkey on the market, due to the significant share of coal energy. Ukraine provides supplies of cenospheres up to 10 thousand tons per year. There are very few own sources of cenospheres in North America, the European Union and Great Britain.

The total global market for cenospheres is estimated at about $ 500 million per year and is segmented by application. It follows that the world sales of cenospheres are approximately 500 thousand tons. In general, the volume of supplies of cenospheres to the world market tends to decrease. This is due to the growing demand for dry fly ash and the high cost of maintaining ash dumps.

The main areas of application of cenospheres: drilling and cement mixtures, production of building materials, refractories and polymers, new composite materials, sound and heat insulation materials. Cenospheres can be coated with special substances for adhesion to polymers. Fractionated cenosphere is also offered to our customers: such fractions as: 0-100 microns, 0-160 (150) microns, 0-300 microns and others are possible.

Cenospheres combine all the advantages of a spherical shape, small particle size, low density, fluidity and inertness with safety for the environment and fauna.

Packaging: polypropylene big bags of 500 kg, installed on a pallet or multilayer paper bags of 20 kg. The shipment is carried out in 20 tons with delivery anywhere in the world.

Working mechanism

01. place an order

Make and send us a pre-order.
Together with you, we will clarify all the requirements for the cenospheres.

02. specification

Further, the Customer is provided with a specification and a reliable sample.

03. cost calculation

After approval by the Customer of the sample, a cost calculation is made, subject to all the conditions of the Customer in the form of a commercial proposal.

04. signing a contract

After the price is approved, the parties sign a general contract. The Customer provides the Supplier with a purchase order indicating the size of the lot, packaging, place of delivery and other requirements, including terms of delivery and payment.